Kennel

 zt@livecn

web:  http://wanpai.cn/download.html

wap:  http://wap.wanpai.cn/

 欢迎意见和建议，嘿嘿

几个月没更新了哈。

先是回家

回来后很忙

忙完后有点sick

 

伟哥有mm了

打牌五人组又要行动了，顺便庆祝qq生日

 

昨天居然把彼vivi当成了此vivi。。。

借wudai生日请饭的机会，打牌五人组终于再次开战。狗年运气果然不错，第一把就1v4大光连升7级。由于在座有4个本命年，所以一致推测wudai比输，后来果然应验（不过wudai垫底也是家常便饭阿。。。）grossboy仍旧喜欢局后总结罗嗦，密特死磕，rainlion居然一直在玩江湖II，b4！weige刚从美国yl回来，没有力气过来了，避风塘空气又太差，决定转战到海底捞，占个座位继续打到5：30。吃晚饭走路去佰金K歌，路上居然下起了小雪，2006的第一场雪啊。lp，密特和wudai是主力，kenshi和gb打游戏，qiqi依旧睡觉。。。

总的来说，打得不是很过瘾，时间太短了。不知其他牌棍感觉如何。

 

最后，祝wudai生日快乐，老大不小，该找个lp了。 grossboy同学早点找到工作，然后请大家吃个饭。

 

居然还在，哈哈。这可是用ue一行一行写出来的啊，当时怎么就没想过找个编辑器呢。。。

 

Q: How do I reset my router hardware to the default settings. (#2094)
A:  The 7004 ABR, VBR, FW Series, 2404WBR and 2804 Series To Reset the newer Barricade Router, use the RESET button on the Router. It is found on the rear panel (except 7004ABR/7008ABR, where it is found in the front). It's a small pinhole blue button. Use a paperclip / pen / pencil to hold in. Reset can be done in following ways. If you find Power LED blinking, then it indicates a successful RESET. Procedure 1 - Unplug all the cables except the power cord. While the Barricade is powered ON, Hold the RESET button for 30 seconds or as long as you find the Power LED blinks. Procedure 2 - 1 - Unplug all the cables except the power cord. 2 - While the Barricade is powered ON, Hold the RESET button for 5 seconds. 3- While holding the RESET, turn OFF the power to the Router. 4- Continue to hold it for 5 seconds, then turn ON the power to the Router. 5- Wait for another 5 seconds and then release the RESET button. Procedure 3 - 1 - Unplug all the cables except the power cord and Power ON the Router. 2 - Hold the RESET button for 3 seconds. 3 - Release the RESET button for 2 seconds. 4 - Continue Steps 2 and 3 for Four more times. Note: If the Procedure 2 and Procedure doesn't work, then try the same procedure with longer time. Use 10 seconds (instead of 5 seconds) for Procedure 2 and use 15 seconds (instead of 3 seconds) for Holding the RESET button for procedure 3. The 7004BR and 7008BR series router. Manual Pin Reset: * Unplug all the cables, except for the power cord. * Locate the COM port on the back of the unit. Reading left to right, find pins 3 and 8. (This would be the 3rd pin from the left on the top row, and 3rd pin from the left on the bottom row.) * Turn off the Barricade. * Using a paper clip, short (hold clip touching both) pins 3 and 8 (If reset is not successful, try pins 4 and 8). * While holding the short (paper clip) in place, switch the Barricade to the "ON" position. When you turn the Barricade on, please watch the M1 light. To verify that you have a good reset, the M1 light will blink 8 times, and then will resume its normal once per second blinking pattern. * Once you see the normal M1 light activity, then remove the paper clip. * Turn the Barricade off. * Plug in all the cables to the unit and power it back on. Note: The ABR model cannot be reset using the serial port! DO NOT TRY THIS AT HOME!

后天外婆就要回家了。

小时候，除了爸爸妈妈，最亲的就是外婆了。还记得很小很小的时候，和外婆一起睡觉，外婆给我讲了很多故事，宰相肚子能撑船，望娘滩，好多好玩的谜语......，还有这个超级复杂的字:

长大一些后，外婆就讲她年轻时候的故事。外婆虽然生长在农村，也只有小学文化，但是却很有见识和修养，能唱会跳，还教过书，还教过我爸爸：）。年轻时也经历过很多磨难。当初唐山大地震的时候，外婆就正好在唐山，那晚她住的那个楼里只有三个人幸免于难。 对于上个世界三十年代的人，她的思想就算在现在看来，也算是“先进”(措辞不当)。记得小时候，外婆就说，儿孙们要孝敬她，就在她健健康康的时候好好孝敬她，不要等她病在床上了，才想起来去看他。如果那时候才卖水果什么的去看她，她就扔掉。还有要我给他唱《外婆的澎湖湾》......

 

人老了大多会有一些病。外婆很早就的了高血压，有时候还挺严重的。不过尽管如此，她看起来总是得很有活力，经常去跳跳舞，或者在家里拉二胡唱歌，以前还教过我，可是学了一点，没有坚持下来。

这次见到她，觉得外婆一下子老了很多。皱纹多了不少，走路也不太稳了，也许以后也没法再出门玩了。这一个月也只去看了她两三次，后天早上估计也没法去送她了。

 

希望外婆身体永远健康。